How to use the MyTcase

How to open your MyTcase.

It is recommended that two people work together opening and securing your MyTcase.

STEP 1

If this is your first time installing your TV follow steps 2 – 5, If already installed skip to step 6.

STEP 2

Lay the MyTcase flat and remove the front cover by flipping the latches to the outside and remove from the catches and lay cover to side.

STEP 3

Inside you will find a box that contains the support rails for a standard VESA mount and packet of hardware.

  • Depending on the model of your TV, you will find 4 VESA mounting holes that will allow you to attach the rails to.
  • Included in the hardware packet are several mounting bolts that range from 4mm – 8mm with spacer washers. Caution should be exercised to verify the right bolts are used to prevent damage to TV. Too short or too long of a bolt or even the wrong sized forced in the back of the TV could damage it. We recommend you verify bolt size and pattern of your TV specifications as all manufacturers are different. ( Note: in the event the hardware packet does not contain the required hardware, we suggest a visit to your local hardware store for assistance.
  • Once the right hardware is verified and fit, align the VESA Rails on the back so it is centered inside the MyTcase and secure to TV. Use spacers or washers as needed to maintain alignment and secure.
STEP 4

Lift the TV and place top rail into top slide of VESA Mount inside MyTcase and latch to bottom slide of VESA Mount MyTcase. You will know the TV is secured if you hear the snap of the latches and you cannot remove without releasing the latch straps at the bottom.

STEP 5

Replace front cover by slipping top on first and then lower to bottom and securing latches on each side.

STEP 6

With the MyTcase in its upright/carry position place on a secure surface.

STEP 7

Rotate legs under the MyTcase perpendicular to Box and Lower Handle so it is secure and snaps into the back legs. (Note This is a secure snap so the bar will stay locked in)

STEP 8

Now with the MyTcase secure remove the front cover by flipping the latches to the outside and remove from the catches.

STEP 9

The Front cover can now be placed on top and secured with the latches to create a sunshield or can be placed behind the MyTcase.

STEP 10

Plug into your power source and receiver and you are now ready to enjoy your TV, where you want to be.

How to install your TV in the MyTcase.

Step 1

Verify your TV will fit within the dimensions of the MyTcase: 38.6 X 23.4 X 3.9” (Note: Some TVs may require the Foam Blocks on the side be trimmed with a sharp knife for a more custom fit.)

Step 2

Verify standard VESA Mount holes in the back of your TV (Depending on the model of your TV, you will find 4 VESA mounting holes that will allow you to attach the rails to).

Step 3

Lay the MyTcase flat and remove the front cover by flipping the latches to the outside and remove from the catches and lay cover to side.

Step 4

Inside you will find a box that contains the support rails for a standard VESA mount and packet of hardware.

Step 5

The packet of hardware includes standard M4, M6, and M8 screws, washers, and spacers that are used most often in TV mounts. Caution should be exercised to verify the right bolts are used to prevent damage to TV. Too short or too long of a bolt or even the wrong sized forced in the back of the TV could damage it. We recommend you verify bolt size and pattern of your TV specifications as all manufacturers are different. ( Note: in the event the hardware packet does not contain the required hardware, we suggest a visit to your local hardware store for assistance in determining the Bolt needed).

Step 6

Once the right hardware is verified and fit, align the VESA Rails on the back so the TV will be centered inside the MyTcase and secure to TV. Use spacers or washers as needed to maintain alignment and secure.

Step 7

Lift the TV and place top rail into top slide of VESA Mount inside MyTcase and latch to bottom slide of VESA Mount MyTcase. You will know the TV is secured if you hear the snap of the latches and you cannot remove without releasing the latch straps at the bottom.

Step 8

Replace front cover by slipping top on first and then lower to bottom and securing latches on each side.

Congratulations! Your TV is now installed and ready to be enjoyed where you want to be.

How to close and store your MyTcase.

It is recommended two people work together to close and secure your MyTcase.

Step 1

After disconnecting from your power source and securing the cord and cables inside the box:

Step 2

Remove front cover on top by unlatching the latches on the side and place over to the side.

Step 3

Pressing down on the legs, pull handle from the snap position. Rotate handle to the upright carry position securing them within the detents on side in its most vertical position.

Step 4

Rotate legs to fit under the MyTcase.

Step 5

Lay the MyTcase on a flat surface and place the top of the front cover on first at the top and rotate bottom so latches on side align and can be secured.

Step 6

You are now ready to store your MyTcase knowing your TV is secure and protected for your next event.